How to use circular saw

How to use circular saw

 

If you have an urge to use circular saw than an important step you need to learn are safety tips and tricks . Follow these safety measures while using circular saw for your protection

Circular saws are widely used both in the workshop and in the jobsite. They have effective uses for making overhead cuts while building construction.  They are mostly used in roofing.

However, circular saw can cause serious injuries if operator is not attentive during work. Please follow these safety tips and tricks while using circular saw to avoid injuries.

How to use circular saw safely.

What are the circular saw safety tips?

Here are some steps you must follow for work safely with circular saw.

1. Put on safety equipment before handling the saw

You have to follow this safety step to confirm your safety while using circular saw. It is very important to use safety equipments while using circular saw.

Circular saw produces very loud sound that may damage your ears. Always use a good air protector to avoid air damage. Safety goggles are also very important while using circular saw.

The dust plays a vital role to damage the lungs of work. In this case a good respirator is highly recommended to protect our lungs from dust produced while working with circular saw.

These are safety tips that help you to use circular saw safely.

2. Do a saw check

Check every single part of circular saw for proper work. Verify the retracting minor guard to make sure it retracts and recovers correctly.

The biggest safety feature provided in circular saw is retracting lower guard. Please don’t use a circular saw which has defective retracting lower guard.

Make sure it’s functioning freely before using the saw. Unplug the circular saw from the socket while checking.

If you’re using a mobile battery in circular saw, always remember to remove the battery before checking the saw.

This prevents the danger of accidently switching the battery during checking the circular saw.

3. Learn to hold it properly

Two different type of circular saw are available in market. One is sidewinders and the other is worm drive saws. It is based upon the position in which they are held while working. Right handed circular saws and left handed circular saws are two main categories of circular saw.

To learn more about other tools used in our daily life click on the link.

.

Sidewinders saws and worm drive is mostly right hand and are mostly left handed respectively. Due to high torque produced by circular saw while working some people prefer sidewinders, while worm drive saw are preferred by other people.

Whatever type is not proffered, study how to grasp circular saw correctly and make sure that your location is not embarrassed during functioning with the circular saw.

4. Use a safe depth of cut settings

Before cutting with a circular saw, you have to set the depth of cut to match the thickness of the board you’re trying to cut.

When you set depth of cut, you need to make sure that too much blade is not exposed beneath the material you’re cutting.

So, make sure that the lowest tooth of the blade does not extend more than 1/8 inch beneath the board you’re cutting.

A depth of cut properly set like this ensures a safe and accurate cut.

5. Only use sharp blades

While cutting a material with the help of a circular saw, never struggle to power the saw throughout the stuff. Just direct the saw through the cut.

If you are using a lot of power to make the cut through the material, it is just because of dull blades.

Always avoid using dry blades in circular saw. Always use those blades that are sharp and easily cut the object that you are trying to cut. It will make your work easy and perfosinal

6. Unplug the circular saw when not in use

If your work is done using the circular saw, it is safe to unplug circular saw from the power outlet. Always remember to unplug power outlet when the circular saw is not in use.

If someone on its switch by mistake it may cause serious and harmful problem. In this way something near the machine would be harmed.

Make a habit to unplug the circular saw to avoid any harm or injury. Remove the battery of a cordless circular saw, when you’re done using it.

Unplug the circular saw when you’re changing swap old or dull blades with new sharper ones.

Always remember to unplug the saw.

7. Never use a defective circular saw

If you find out any error in circular saw or when it is not working correctly then avoid using the saw.

If you notice any strange vibration when you switch it on. Then switch it off quickly, unplug it until it’s reepaired

8. Do not overreach

When you are cutting long boards with the help of your circular saw. Cut the space where your hands can easily reach, raising one of your legs up to achieve additional contact with your hands is harmful.

That is totally wrong. Always keep a fine and stable footing, and grip the circular saw with two hands as thought.

9. Keep live cords out of the way

This one is cute noticeable; wounding a live cord may result in your electrocution. So keep live cords out of the cut region to evade any trouble.

10. Check for obstructions in stock

Before cutting any stuff, particularly wood ensure there are not obstructions such as nails and screws fixed in the wood.

Cutting a nail or screw fixed wood can cause harm to your circular saw, and inferior still, might result cause damage to you.

11. Secure the stock or board before cutting

Before cutting a board, ensure that it is held with clamps to shun any movement during the cut. An unsecured store is insecure to cut, and should not be attempted.